TemboTusk (31)

Skottle Accessory Kit   The Kit includes: Regular Skottle LidStainless Steel Wind GuardSteam Tray  The  Lid is used with the TemboTusk Skottle Grill to steam vegetables, speed up cooking, keep food warm, make popcorn etc. The Wind Guard is for those windy days.   The Steam Tray helps if you want to be a bit more creative with the Skottle Grill.  Smoke meats, steam veggies, seafood, make pizza etc.  Save $5.50 with the Accessory Kit.  (Skottle Grill in photo not included.)

Skottle Patio Cover  The Skottle Patio Cover is both at home on the trail and on the patio.  The Cover is made of long lasting, weather resistent outdoor rated material.  The Patio cover is water resistent and folds up small for easy storage in the Skottle Carry bag.  The Skottle Patio Cover is American Made.  Protect your Skottle from inclement weather and angry bird bombs. Get our Skottle Patio Cover and protect everyone's favorite piece of cooking gear! *Do not put cover on while the Skottle is hot.

The Docking Station is an option for those who do not want to leave their Jumbo Front Pull Flat Slide in their vehicle all the time.  The Docking Station is permanently installed and allows the Flat Slide to be easily removed or reinstalled without having to deal with hard to reach bolts.  Have two vehicles?  Put a Docking Station in each vehicle for ease of swapping your slide from truck to truck.   The Docking Station has a quarter inch profile which will not interfere with the normal usage of your cargo area when the slide is removed Docking Station comes with bolts for attaching to the slide. (For JUMBO and SUPER JUMBO Front Pull Slides only)

TemboTusk Bamboo Cutting Board   The Bamboo cutting board is 1/2" x 8" x 10" .  The board comes pre-oiled with Buzzy Waxx cutting board wax.   The TemboTusk Board is perfect for both a cutting board or fancy Charcuterie Board!  Fits into the small spaces of your Overland Rig or cooking setup. Made in USA

The TemboTusk Wine Tote is a great way to transport any kind of beverage in a tough soft sided container.  When the contents are empty, simply flatten and store away.   The TemboTusk Wine Tote will hold a full 750 liter bottle of wine, a jar of Moonshine or any beverage of your choice. Metal shot cup included.  Simple to carry with attached carabiner hook.  Buy for yourself and give another as a gift!      (Moonshine and wine not included) TemboTusk Wine Tote is American Made! 

 Jumbo Side Pull Slide Choose from either a 14 gauge Steel Slide or 1/8" Aluminum Slide The Aluminum slide is stronger than the steel slide and weighs about 33 percent less. There is a cost differance as Aluminum is more expensive than steel.   (Click on the Slide Material drop down menu) Our Extreme Duty Jumbo Flat Slides uses top of the line, locking slide tracks. These are tough, rugged cargo slides.  Outside dimensions:  35.75" wide x 21" deep    (Foot print of slide) Inside pan size: 34" wide x 20" deep   (Area where the fridge or cargo will fit.) See FAQs for additional fridge and slide clearances.  Cutting Board is optional, Cutting board can deploy from either right or left side depending on setup.   Cutting board is 12" x 18".  Fridge will sit 1.5" higher with this option. The Jumbo slides will accommodate fridges 60 to 110 liters  Don't forget to order the Buffalo Straps to hold down the fridge to the slide.

Mid-Size Front Pull Slide  18 x 30    Choose from either a 14 gauge Steel Slide or 1/8" Aluminum Slide The Aluminum slide is stronger than the steel slide and weighs about 33 percent less. There is a cost differance as Aluminum is more expensive than steel.   (Click on the Slide Material drop down menu) Perfect for the:                        National Luna 55 ltr & 60 ltr Twin fridges                       SnoMaster 40-60ltr+ fridges                        Dometic CFX-50US   Our Extreme Duty Flat Slides, uses top of the line, locking slide tracks. These are tough, rugged cargo slides.  Outside dimensions:  21.25" wide x 31" deep    (Foot print of slide) Inside pan size: 18.25" wide x 30" deep   (Area where the fridge or cargo will fit.) See FAQs for additional fridge and slide clearances.  Cutting Board is optional, 12 x 18 inches.  Fridge will sit 1.5 inches higher.   Don't forget the Buffalo Straps!

 The new Adjustable Leg Skottle Grill Kit is an improvement over the the original Kit in a number of ways.  The cooking pan has not changed, however, the all American made Skottle Grill will have new Adjustable legs.  The legs will collapse down to 20 inches making them easier to carry and store. Each leg will have a hard stop at 29 inches and 36 inches and fine adjustment for uneven ground.    The second area of improvement will be in the stove burner that will be standard with every Kit.  We are upgrading the current stove to include the Kovea Scout Stove.  An outstanding quality stove from South Korea.  The Kovea stove has excellent low and high flame control with a push button flame starter.  The stove has enough power to handle windy weather.   The BlueRidge Overland Gear Carry Bag has also been improved.  The bag will include straps on the outside of the bag to slot the shorter legs into.  You can now carry and store the Skottle Grill in one package.  Everthing you need to order in one place.  The KIT contains:              1: One Skottle Grill    2: One set of Adjustable Legs                        3: One 10,000 BTU Kovea Scout burner     4: One Skottle Carry Bag                     The TemboTusk Skottle can be used to cook anything at home or while camping, tailgating at a game or just to get you out of the kitchen and outdoors!   The grill is fabricated in the USA and comes per-seasoned so it can be used immediately.    Gas bottles are not included.       Patent number: 9,993,112

 Standard Side Pull SlideChoose from either a 14 gauge Steel Slide or 1/8" Aluminum Slide The Aluminum slide is stronger than the steel slide and weighs about 33 percent less. There is a cost differance as Aluminum is more expensive than steel.   (Click on the Slide Material drop down menu) Our Extreme Duty Flat Slides,  uses top of the line, locking slide tracks. These are tough, rugged cargo slides. Outside Dimensions: 29.75" wide x 19" deep    (Foot print of slide) Inside Pan Size: 28" wide x 17" deep             (Area where the fridge or cargo will fit.)See FAQs for additional fridge and slide clearances.  Cutting Board is optional, Cutting board can deploy from either right or left side depending on setup.   Cutting board is 12" x 18".  Fridge will sit 1.5" higher with this option.  Don't forget the Buffalo Fridge Straps  

Camp Table with Collapsible Basin We have incorporated a collapsible sink into our Camp Table.  The Basin Table can be used by itself or with our existing camp table by matching the hooks and hoops at each end of the tables. The tables can be hooked together either side by side or end to end.  The basin colors are random and might not be exactly as pictured.  TemboTusk has designed a beautiful, functional Camping Basin Table.  The table is designed to fit into most storage drawer systems or other limited space environments.  The Table employ a unique hook and hoop system which enable them to daisy chain more than one table together.  Either length wise or width wise. The Camp Basin Table is constructed from metal and bamboo plywood. The Table  comes with an extremely durable carry bag with integral leg storage in the cover. Tables include Adjustable Legs for adjustments between 20", 28" and 36"  with infinite adjustments for uneven ground.  The Table Bag is made of a duel layer heavy weight material with a full wrap 1/2" padding.  The interior has webbing on the interior side panels for reinforced tough construction. Marine grade thread is used for rough outdoor environments. Comes with a zippered pocket on the front of the bag, perfect for cutting board and utensils storage. Assemble table dimensions:  15" wide x 30" long x 29" high Disassemble table dimensions: 15" wide x 30" long x 1.25" thick. Tables are sold as single units.  The Camp Table  is an American Made Product.

TemboTusk has developed a Skottle Insert for the Snow Peak IGT Table. The Insert will allow the Skottle to be used with the IGT Table, it is made of Stainless Steel and fits flush into the opening of a two unit IGT frame. The Insert makes the IGT Table even more useful as a cooking surface.  The IGT table pictured is not included.

The Docking Station is an option for those who do not want to leave their Standard or Mid-size Front Pull Flat Slide in their vehicle all the time.  The Docking Station is permanently installed and allows the Flat Slide to be easily removed or reinstalled without having to deal with hard to reach bolts.  Have two vehicles?  Put a Docking Station in each vehicle for ease of swapping your slide from truck to truck.   The Docking Station has a quarter inch profile which will not interfere with the normal usage of your cargo area when the slide is removed Docking Station comes with bolts for attaching to the slide. (For Standard and Mid-size Front Pull Slides only)

What would cooking on a Skottle be  without a TemboTusk Skottle Apron???   We now have Aprons to go along with your Skottle!   The aprons are a cotton/polyester blend.  They look great while cooking! 

TemboTusk Embroidered Velcro Patch 2.5" x 3.5"  Velcro hooks on the back of the patch  Free Shipping  USA only

   Adventure Skottle Grill Kit  The Aventure Skottle is the Table top, 12" pan version.  If you are looking for the larger version, please click here:  ADJ Skottle Grill Kit The Kit comes with the Adventure Skottle, the carry bag and a burner.   Perfect for Motorcycle, canoe, fishing or even tailgating.  Anyplace where room is an issue, the Adventure Skottle Grill can help.  Size:  The pan is 12" across and the aluminum legs are 12.5" high. Weight:  2 pounds, 11oz.  (Skottle and aluminum legs) Weight:    Carry Bag,  13 oz. With the TemboTusk designed adapter, the Kovea Scout 10,000 BTU stove can be used with the Adventure Skottle Grill.   The Kovea Stove is a Isobutane/propane fuel canister stove.   It can use either Butane or Propane (Gas canister not included.)     Kit contains:               TemboTusk Adventure Skottle Grill   Kovea Scout  10,000 BTU Stove Carry Bag  The Skottle is fabricated in the USA and comes pre-seasoned so it can be used immediately.   The aluminum legs are removable.   Adventure Skottle Grill:  USA Made in SoCalCarry Bag: USA MadeKovea Stove:  Made in South Korea  Patent number:  10,426,294

SUPER JUMBO SIDE PULL FRIDGE SLIDE   Choose from either a 14 gauge Steel Slide or 1/8" Aluminum Slide The Aluminum slide is stronger than the steel slide and weighs about 33 percent less. There is a cost differance as Aluminum is more expensive than steel.   (Click on the Slide Material drop down menu) Our Extreme Duty SUPER Jumbo Flat Slides, is made to accommodate fridges 95 liters and above.  Our slides use top of line heavy duty locking and non-locking slide tracks. These are tough, rugged cargo slides. Outside dimensions:  40.75" wide x 23" deep    (Foot print of slide) Inside pan size: 38.3/8" wide x 22 5/8" deep    (Area where the fridge or cargo will fit.) The fridge pan will put the fridge 1" above the bolt down location. See FAQs for additional fridge and slide clearances.Cutting Board is optional, 12 x 18 inches.  Fridge will sit 2.5 inches above the bolt down location. The Super Jumbo slides will accommodate fridges 95 to 110 liters  Example Fridge:  SnoMaster SMDZ-LP96D  92.5ltr   Don't forget to order Tembo Fridge Straps  to hold down the fridge to the slide.

 Jumbo Front Pull Slide Choose from either a 14 gauge Steel Slide or 1/8" Aluminum Slide The Aluminum slide is stronger than the steel slide and weighs about 33 percent less. There is a cost differance as Aluminum is more expensive than steel.   (Click on the Slide Material drop down menu) Our Extreme Duty Jumbo Flat Slides uses top of the line, locking slide tracks. These are tough, rugged cargo slides.  Outside dimensions:  35.75" wide x 21" deep    (Foot print of slide) Inside pan size: 34" wide x 20" deep   (Area where the fridge or cargo will fit.) See FAQs for additional fridge and slide clearances.  Cutting Board is optional, Cutting board can deploy from either right or left side depending on setup.   Cutting board is 12" x 18".  Fridge will sit 1.5" higher with this option. The Jumbo slides will accommodate fridges 60 to 110 liters  Don't forget to order the Buffalo Straps to hold down the fridge to the slide.

 Standard Front Pull SlideChoose from either a 14 gauge Steel Slide or 1/8" Aluminum Slide The Aluminum slide is stronger than the steel slide and weighs about 33 percent less. There is a cost differance as Aluminum is more expensive than steel.   (Click on the Slide Material drop down menu) Our Extreme Duty Flat Slides, uses top of the line, locking slide tracks. These are tough, rugged cargo slides.  Outside dimensions:  18.75" wide x 29" deep    (Foot print of slide) Inside pan size: 17" wide x 28" deep   (Area where the fridge or cargo will fit.) See FAQs for additional fridge and slide clearances.  Cutting Board is optional, 12 x 18 inches.  Fridge will sit 1.5 inches higher.   Don't forget the Buffalo Straps!

  The Tembo Straps are an extreme duty off-road refrigerator, cooler and cargo tie-down system. The Tembo Straps are made of  heavy duty one inch polyester webbing, attached to a metal cam buckle and are constructed with built-in loops designed to attach to almost any anchor system or roll bar. No more hunting for a lost strap, it is always attached, but easily removed. The Tembo Straps have a tie down reach of approximately 39 inches. The tie down system comes with four straps, and is packaged in a heavy duty reusable storage container. Click here:  How to install a set of Buffalo Straps  

"The FIRE PIT" by TemboTusk Fire Pit Orders will ship within 2-5 days of order date.  The propane Fire Pit is a fun answer to the bulky fire pits available on the market.  We wanted a fire pit that was easy to assemble, easy to store and light weight.    The Fire Pit by TemboTusk is made from Stainless Steel and is designed to be used as a propane fire pit only.  The Kit includes the flat pack fire pit, a 20,000 BTU burner, a 4' stainless steel braided or rubber propane hose with regulator and a high quality carry bag.  The assembled fire pit measures 12" long by 10" wide and 7" tall.  The fire pit includes a bottom wind guard, a diffuser plate and its own Stainless-Steel Flame trees and fire rocks with bag.  The fire pit slots together and packs flat.  The Carry Bag is made from an extremely durable dual layer heavy weight material with padding to protect both the Fire Pit and the vehicle it is stored in. Marine  grade thread is used for rough outdoor environments and the bag comes with a sturdy handle for transport.  The closures are YKK zippers.   The fire pit carry bag has two internal sections; one for the stainless steel fire pit parts and the other for the propane hose.   The Bag is 12.5" x 14" x 2" , so it can fit in a storage drawer, AluBox, Front Runner Wolf Pack or behind your seat in the vehicle.  The TemboTusk Fire Pit takes very little room for storage.    What comes with the Fire Pit Kit? 1:  Two Stainless Steel end pieces 2:  Two Stainless Steel side pieces (that slot  into the end pieces)3:  S.S. flame diffuser4:  S.S. bottom wind guard 5:  Stainless-Steel Flame trees6:  Burner with a 3/8" flared fitting7:  4' Stainless Steel braided or rubber  propane hose with regulator8:  Cotton Bag with fire rocks. 9:  Heavy duty carry bag10: Soot Gloves11: Gas hose wrench with bottle opener   How to use your TemboTusk Fire Pit(Do not use in high winds)  The Stainless-Steel Fire Pit comes flat packed in its own carry bag.  1: Remove all the parts from the bag.  2: Assemble the parts by inserting the sides of the firepit into the end pieces one at a time.  Making sure the bottom of the fire pit come together.  Drop in the angled wind guard. 3: Insert the burner pipe into the fire pit through the large keyhole and lock the end cap into the other side.  The burner pipe has a notch milled into it to secure it into the keyhole.  Make sure the burner holes are facing up. 4: Drop in the flame diffuser over the burner, using the slot to secure the diffuser in place. 5:  Assemble the Stainless-Steel Flame trees and place over the diffuser.  6: connect the 3/8” gas connector to the burner.  7:  Making sure all valves are set to OFF.  Connect the gas hose and regulator to the propane bottle.  8: To light:  Carefully open the gas valve and adjust gas flow with the regulator knob.  Use a long BBQ lighter or Tembo tusk Arc lighter to ignite the first holes in the burner.  Adjust flame to a desired height.  Never open the valve to its fully open position. 9: Enjoy the Fire Pit responsibly. 10: allow to cool before disassembly and packing. Remember:  The Fire Pit is not a cooking device. The burner emits soot not suitable for cooking.  If you must cook, please use one of our TemboTusk Skottle Grills!  CLEANING AND CARE The TemboTusk Fire Pit is made from Stainless steel.  Wipe off any soot to clean or place the parts in the dishwasher.  Do Not place the burner in the dishwasher.    How long will a gas bottle last? The Fire Pit is rated at 20,000 BTUs 1 pound bottle will last approximately 1 hour  5 pound bottle will last approximately 5 hours  10 pound bottle will last approximately 10 hours  20 pound bottle will last approximately 20 hours   REGULATOR HOSE ASSEMBLY Only use hose supplied with your Fire Pit. It is designed to work with a LP Gas Cylinder and is a Type-1 connection device with the following features: The system will not allow gas flow from the cylinder until a positive connection to the cylinder valve has been made. NOTE: The cylinder valve must be turned off (clockwise) before any connection is made or removed.  A flow limiting device, when activated, restricts the flow of gas. To reset, turn the regulator valve to off position.  If you have any issues with your hose or regulator, please contact TemboTusk at Info@TemboTusk.com.   Rules to Live By: Never leave your TemboTusk Firepit unattended. Never use the Fire Pit indoors. ((Carbon Monoxide) For OUTDOOR USE ONLY. Adult use only.  Children are not to operate the Fire Pit.  Before attaching the propane canister check to make sure all your valves are in the OFF position and that the hose is in good working condition. Make sure all fittings are snuggly attached. Always light  the burner on the lowest setting. Use a long BBQ lighter or Tembo Tusk Arc lighter and light at the first hole on burner closest to the gas inlet. Wait for your Fire Pit to completely cool before touching it. This is not a cooking device. Always check with local law enforcement regarding fire restrictions.   Never use the Fire Pit indoors.  Carbon Monoxide is deadly.  Make sure that the Fire Pit is in a properly ventilated area outdoors. Never use the Fire Pit in a camper, tent, or garage. Propane gives off carbon monoxide. Too much carbon monoxide will cause a person’s oxygen level to be depleted and may lead to death. Make sure that the propane cylinder that attaches to the Fire Pit is up to date and in good working order.   Tighten all fittings on the tank and Fire Pit burner before use. Place the Fire Pit on a firm, level and nonflammable surface, away from brush or overhangs. To protect the ground, put the Fire Pit on a fire blanket, grab a flat rock or use an established fire ring. Keep the propane tank upright. If you hear or smell a propane leak, quickly turn off the burner, immediately exit the area and call the fire department for assistance. The Fire Pit will be hot during use and will take time to cool after use.  Use gloves to disassemble.    INSPECTING REGULATOR HOSE ASSEMBLY  The Regulator Hose Assembly is a pre-assembled unit. Do not take apart. Prior to each use, visually inspect the regulator hose assembly. If there is evidence of abrasion, wear, cuts or leaks, the hose must be replaced prior to the appliance being put into operation. To remove, use a wrench to loosen the brass connector on the hose. To reattach, wrench tighten the brass connector back to the burner assembly. CONNECTING REGULATOR HOSE ASSEMBLY TO LP GAS CYLINDER Check that cylinder is upright, and the valve is closed by turning the knob clockwise.  Check that the Regulator Control Valve is also closed by turning the knob clockwise.  Remove the protective safety caps from the cylinder valve and the Type-1 Coupling Nut on the regulator.  Insert the nipple of the large coupling nut into the cylinder valve outlet. Ensure that the coupling nut is centered properly.  Turn the large coupling nut clockwise by hand and tighten to a full stop. Take care not to cross thread the coupling nut onto the cylinder valve. Do not use tools to tighten connection.  NOTE: If you are unable to make the connection, repeat steps 4 and 5.  Check that the hose does not contain kinks, does not come into contact with sharp edges, and does not contact surfaces that may become hot during use.   GAS LEAK TEST INSTRUCTIONS Note: The gas leak test must be performed in an area that has adequate lighting in order to see if bubbles are developing. DO NOT use a flashlight to check for bubbles.  Create a mixture of 50% water and 50% liquid dishwashing soap.  Turn the gas cylinder valve to the OFF position (clockwise). Then turn regulator control valve to OFF position (clockwise).  To turn ON the fuel supply, turn the cylinder valve knob one turn counterclockwise. Gas will flow through and stop at the regulator.  Using a clean brush, apply the soap water mixture to the following: Cylinder Valve to Cylinder Connection Nut to Cylinder Valve Back side of Connection Nut to Brass Nipple Control Valve next to Regulator connection to Gas Supply Hose LP Cylinder Welds Gas Supply Hose connection to Burner on Fryer Full length of Gas Supply Hose  Check each junction for growing bubbles which indicates a leak.  Next, turn ON regulator valve (clockwise) to permit gas to pass through the hose. Apply soap water mixture to full length of gas supply hose and connection to burner on fryer. Check each place for growing bubbles which indicates a leak.  Turn OFF gas supply valve (clockwise) on LP Gas Cylinder.  Turn regulator control valve to OFF position (clockwise).  Tighten any leaking connections.  Repeat soap water mixture test until no leaks are detected. After you are certain there are no leaks, turn the tank valve and regulator control valve to OFF position. Wait 5 minutes for any gas fumes to evacuate before lighting the burner.  Instructions and Warnings WARNING! The warnings and safety instructions in this manual MUST be understood and followed to provide reasonable safety and efficiency while using your appliance. Read the assembly, operation, and storage instructions thoroughly before operating or servicing this equipment.  FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT IN FIRE, EXPLOSION OR BURN HAZARD, WHICH COULD CAUSE PROPERTY DAMAGE, PERSONAL INJURY OR DEATH. QUICK START INSTRUCTIONS  Use ONLY on a level, stable, non-combustible surface like bricks, concrete or dirt or established fire ring. Do NOT use this appliance on any surface that will burn or melt like wood, asphalt, vinyl, or plastic.  Be sure the valve on the gas source and regulator are in the OFF position. Connect the regulator to the gas source. Hand tighten plastic connection. DO NOT OVER TIGHTEN!  If using the adapter for a 1 LB canister, connect the adapter to the regulator and then to 1 lb tank.  Connect the brass hose to flare fitting. Tighten brass nut until secure with a wrench.  Open the gas valve at propane tank connection—Adjust flame with the Regulator if the gas hose has a valve.   Light long lighter and place flame by the burner hole closest to fittings NOTE: YOU MUST LIGHT LONG LIGHTER FIRST BEFORE TURNING ON GAS! FAILURE TO DO THIS MAY RESULT IN FIRE, EXPLOSION OR BURN HAZARD, WHICH COULD CAUSE PROPERTY DAMAGE, PERSONAL INJURY OR DEATH. VERY SLOWLY open regulator valve until first burner hole ignites. Continue slowly opening the regulator until the Fire Pit is producing desired flame height.  WARNING Do NOT leave this appliance unattended while in use. The user must remain in the immediate area of the product and have a clear view of the product at all times during operation. Keep children and pets away from appliance at all times.  The use of alcohol, prescription or non-prescription drugs may impair your ability to properly assemble or safely operate this appliance.  For OUTDOOR use only. Do NOT use in a building, garage or any other enclosed area. Do NOT use in or on recreational vehicles or boats. NEVER use this appliance as a heater indoors. Do not operate appliance under ANY overhead construction. Keep a minimum clearance of 10 feet (3 m) from the sides, front and back of the appliance to ANY construction. Keep the area clear of all combustible material and flammable liquids, including wood, dry plants and grass, brush, paper and canvas.  Use ONLY on a level, stable, non-combustible surface like bricks, concrete or dirt or established fire ring. Do NOT use this appliance on any surface that will burn or melt like wood, asphalt, vinyl, or plastic.  Keep the fuel supply hose away from any heated surfaces.  To prevent accidental fires, before using the appliances ensure that the hose is not damaged and all joints and connections are not leaking by turning on the cylinder valve, leave the burner valve closed and apply a soapy solution to the joints and connections. If a continuous hissing sound is heard, or if the soapy solution bubbles, there is a leak. Do not use the appliance if there is a leak. Replace the faulty parts.  Extinguish all open flames before connecting or disconnecting the gas supply to the appliance and before checking for leaks.  Do NOT cook with this appliance.  Do NOT move the appliance when in use. Allow the unit to cool to 115°F (45°C) before moving or storing.  This appliance will be hot during and after use. Use insulated oven mitts or gloves for protection from hot surfaces. In case there is a fire, call the local fire department of dial 911. Stay clear from flames. This product is not intended for commercial use.  After appliance has cooled to 115°F (45°C) and hose has been removed, can it be placed into its carry bag. In the event the appliance has been exposed to water, tilt the appliance forward and allow water to drain from the burner before attempting to ignite. Use appliance only with LP (propane) gas and the regulator/valve assembly supplied. • Installation must conform with local codes, or in their absence with National Fuel Gas Code, NFPA 54/ANSI Z223.1. Handling and storage of LP cylinders must conform to LP Gas Code NFPA/ANSI 58. Appliance is not for use in or on recreational vehicle and/or boats.  STAY SAFE: Do not modify this appliance. Modifications will result in a safety hazard.  Apartment Dwellers: Check with management to learn the requirements and fire codes for using and LP Gas appliance at an apartment. If allowed, use outside on the ground floor with a 10-foot clearance from walls or tails. Do NOT use appliance on or under any apartment, condominium balcony or deck.  Before opening LP tank valve, check the coupling nut for tightness. When appliance is not in use, turn off control knob and LP tank valve on supply cylinder.  Never use LP tank if visibly rusted, damaged, or out of date. If you notice grease or other hot material dripping from appliance onto valve, hose or regulator, turn off gas supply at once. Determine the cause, correct, clean and inspect valve, hose and regulator before continuing. Perform a leak test.  The regulator may have a humming or whistling noise during operation. This will not affect the safety or use of appliance.  Clean and inspect the hose before each use of the appliance. If there is evidence of abrasion, wear, cuts or leaks, the hose must be replaced prior to the appliance being put into operation. See product sheet for hose and regulator information.  Do not block holes in bottom or sides of appliance. Hose is a trip hazard.  LP GAS CYLINDER SPECIFICATIONS  This appliance can produce carbon monoxide which has no odor.  Using it in an enclosed space can kill you.  Never use this appliance in an enclosed space such as a camper, tent, car or home. LP GAS CYLINDER (NOT SUPPLIED WITH THIS APPLIANCE) The LP (Liquid Propane) gas cylinder specifically designed to be used the Fire Pit must have a Type-1 cylinder valve and an over-filling protection device (OPD).  DO NOT connect this appliance to an existing #510 POL cylinder valve with Left Hand Threads. The Type-1 valve can be identified with the large external threads on the valve outlet. DO NOT connect to a propane cylinder exceeding 20lb capacity. DO NOT connect to a cylinder that uses any other type of valve connection device. LP GAS CYLINDER To check your local codes, see your local LP gas dealer or natural gas company. This appliance is not intended to be connected to a natural gas supply line. Fire Pit, it must be constructed and marked in accordance with the specifications for LP gas cylinders by the U.S. Department of Transportation (DOT) or the National Standard of Canada, CAN/CSA-B339, Cylinders, Spheres and Tubes for the Transportation of Dangerous Goods as applicable with a listed over-filling device (OPD). The cylinder must also be equipped with:  A shut-off valve terminating in a Type-1 gas cylinder valve outlet. A Type-1 valve that prevents gas flow until a positive seal is obtained.  An arrangement for vapor withdrawal.  A collar to protect the cylinder shut-off valve. A safety relief device having direct communication with the vapor space of the cylinder.  A listed Overfilling Prevention Device (OPD).  A protective cap on cylinder Type-1 Outlet.  WARNING:  Turn off the cylinder valve when your Fire Pit is not in use.  Handle the LP gas cylinder with care. Always secure the LP gas cylinder in an upright position.  Never connect an unregulated LP gas cylinder to your Fire Pit.  DO NOT expose LP gas cylinders to excessive heat or ignition sources.  DO NOT store a spare LP gas cylinder near your Fire Pit.  Allow only qualified LP gas dealers to fill or repair your LP gas cylinder  DO NOT allow the LP gas cylinder to be filled beyond 80% capacity.  Read and follow all warnings/instructions that are on the cylinder and that accompany this product. Never store spare LP gas cylinder near your Fire Pit. This could cause excess pressure to be expelled through the vapor relief valve resulting in fire, explosion, or severe personal injury, including death.  NOTE: PROPANE GAS IS HEAVIER THAT AIR AND WILL COLLECT IN LOW AREAS. PROPER VENTILATION IS EXTREMELY IMPORTANT  Keep the ventilation opening(s) of the LP gas cylinder enclosure free and clear from obstruction and debris.  DO NOT insert any foreign objects into the valve outlet. Damage to the back-check could result. A damaged back-check can cause a leak, possibly resulting in explosion, fire, severe personal injury, bodily harm or death. FILLING THE LP GAS CYLINDER: Allow only qualified LP gas dealers to properly fill or repair your LP gas cylinder.  New tanks should be purged prior to filling; inform LP gas dealer if you are using a new tank.  DO NOT allow the cylinder to be filled beyond 80% capacity. Over-filled tanks can create a dangerous condition. Over-filled tanks can build up pressure and cause the relief valve to expel propane gas vapors. The vapor is combustible and if it comes in contact with a spark source or flame; an explosion causing severe burns, bodily harm, or death could occur.  Always use a protective cylinder cap when the Fire Pit is not connected to cylinder.  If you exchange a cylinder with a qualified exchange program, be sure the cylinder has a Type-1 valve and an over-filling prevention device (OPD).  INSTALLATION SAFETY PRECAUTIONS  If you smell gas:  Shut off gas to the appliance at the tank.  Extinguish any open flame.  If odor continues, keep away from the appliance and immediately call the fire department (911). Failure to follow these instructions could result in fire, explosion or burn hazard, which could cause property damage, personal injury or death.